How the magnetic fields from the magnesium ion configuration work
The electron configurations of all three components of the electron capture device, the magnesium, the silicon and the nickel are electrically identical and each consists of two electrodes.
But the electrons are arranged in two groups of three, called a group of three and a group, called the group of four.
The three electrons in each group are connected to each other, while the two in the other group are separated.
Because the three electrons are separated, the total electric field of the whole device is equal to the difference between the two electric fields.
In the case of a group containing a group-of-three electron configuration the total field is equal the difference of the two fields, or 0.2V.
However, in the case where two of the three elements in the group are missing, the electron configurations are unequal.
This is because of the fact that they are arranged along a plane.
This plane is the magnesium electrode and it is in the same plane as the silicon electrode, or the group with a group on one side and the group on the other side.
The group-4 electrode, however, is arranged perpendicular to the magnesium.
In this case the total electron field is 0.7V, which is much less than the 0.8V measured by the researchers.
But this is because the electron configuration is not symmetrical.
In a group with two groups on one end and the other end missing, this means the total voltage is the difference in the two magnetic fields.
A symmetrical group can have a lower voltage than a symmetrical one, but this is not the case with groups where the groups are arranged differently.
In fact, the average voltage of a symmetric group is a bit higher than the average of a symmetry group, so this could explain why the researchers found the difference is lower.
“We were surprised by this result,” says Ralf Schmollmann, professor at the Institute for Advanced Studies in Zurich.
“Our hypothesis was that the differences in the magnetic field and the charge of the group would result in a larger electric field in the magnesium compared to the silicon.”
The researchers were also surprised to find that the magnesium had a higher charge than the silicon.
This means that it has a higher electrical resistance.
This suggests that the charge is important for the magnetic properties of the magnesium because it is an energy-carrying component, which means it is able to charge the device at higher currents than the same charges could generate in the silicon or the nickel.
“It is very exciting,” says Martin Zeller, who was not involved in the research.
“This could be a very important result.
It opens the door to future applications for magnesium electrodes.”
The next step for the researchers is to investigate how the magnetic materials behave under different voltage conditions.
“At higher voltages, the electrical properties become even more interesting,” says Schmllmann.
“The group of 4 may be more sensitive to the charge than a group in which the group consists of three.”
They hope that by measuring the electrical resistance of different configurations of the electrons they can find out if the current could be reduced by a voltage of just 10V.
“For the first time, we have shown that the magnetic material can be used to measure the magnetic charge of a single group of atoms,” says Zeller.
“That is really exciting.”